火焰原子吸收法测定化探样品中的银铜铅锌

样品经硝酸、氢氟酸、高氯酸分解，制成硝酸溶液，经巯基棉层析柱过滤富集Ag，并用2mol／LHBr溶液洗脱，用火焰原子吸收法测定洗脱液中的Ag和滤液中的Cu，Pb，Zn。用该法测定化探样品中银和铜铅锌，检出限低，结果准确度和精密度均令人满意。     

松潘-甘孜带：是弧前增生还是弧后消减?

根据多年在该区工作实践，认为松潘—甘孜造山带前身的巴颜喀拉盆地是羌塘—他念他翁晚古生代前缘弧之后的一系列多岛弧—盆系的一个大型弧后盆地。三叠纪时，围限此“三角形”盆地三条边缘的构造动力学作用方式具有不同的特征。其东侧为扬子西缘被动大陆边缘(D—T2)，中三叠晚期(拉丁期)转化为与华北和羌塘陆块有关的前陆盆地(T2—T3)，由于扬子陆块向西双向斜向俯冲作用，在其北侧和南侧边缘形成南昆仑和可可西里—甘孜—理塘俯冲消减杂岩。重建的地层层序和沉积地质特征显示巴颜喀拉盆地主体三叠系复理石沉积是周缘前陆盆地。     

四川盆地白垩纪沙漠石英沙颗粒表面特征

石英具有较大的硬度和较高的化学稳定性，因而其颗粒表面特征能很好地反映沉积环境。而通过扫描电镜研究石英颗粒表面微细特征是分析沉积环境行之有效的方法。虽然多数人认为四川盆地白垩纪地层存在沙漠沉积(打儿凼组和夹关组)，但仍有人对沙漠沉积的存在持怀疑态度，并认为是河流成三角洲沉积。过去关于其沉积环境的判别主要是根据沉积结构和构造，并未对其石英沙颗粒表面特征进行过系统分析。笔者对采自四川盆地白垩系不同层位地层的样品进行了石英沙颗粒表面特征系统分析。结果表明，石英沙颗粒表面特征分析可以成功地将石英沙区分为风成和水成沉积。因此，本文从石英沙颗粒表面特征方面进一步肯定了四川盆地白垩纪古沙漠的存在。     

The Discovery of Diamond from the Zhimafang Pyrope Peridotite of the Sulu UHP Metamorphic Zone, East China, and Its Geological Implications

From Donghai County of Jiangsu Province to Rongcheng County of Shandong Province on the southern border of the Sulu orogen, there exposes an ultramafic belt, accompanied with an ultrahigh-pressure metamorphic zone. It can be further divided into the Xugou belt (the northern belt), and the Maobei-Gangshang belt (the southern belt). One grain of diamond has been discovered from the Zhimafang pyrope peridotite in the southern belt using the heavy mineral method. The diamond grain is 2.13 mm × 1.42 mm × 0.83 mm in size and weighs 9.4 mg. The occurrence of the diamond suggests that the Zhimafang pyrope peridotite xenolith is derived from the lithospheric upper mantle. The tectonic emplacement mechanism of the pyrope peridotite xenoliths in granite-gneisses is obviously different from those in kimberlite. The Sulu orogen was located on the active continental margin of the Sino-Korean craton in the Neoproterozoic. The relatively cold and water-bearing oceanic crustal tholeiite slab subducted beneath the lith     

内蒙古固阳渣尔泰山群层序地层学及其控制因素

渣尔泰山群是华北地台北缘中元古代裂陷槽沉积,主要为一套遭受绿片岩相区域变质的碎屑岩-碳酸盐岩建造。根据岩性、岩相、相序和不整合界面的综合研究,对这套地层进行了详细的层序界面分析和层序划分,识别出Ⅰ型、Ⅱ型和暴露-淹没复合型(Ⅲ型)3种类型层序界面,共划分出1个超层序、2个大层序和7个层序。总结了渣尔泰山群在碎屑滨岸、台缘碳酸盐岩与碎屑岩混积、碳酸盐台地、台前斜坡和陆棚盆地等不同古地理背景下的层序发育模式及其内部构成特征,并探讨了复合海平面变化、构造活动、沉积物供给、古地形等因素对层序形成和演化的控制作用。     

云南兰坪-思茅盆地脉状铜矿床铅、硫同位素地球化学与成矿物质来源研究

云南兰坪-思茅盆地中一新生代砂页岩中赋存有许多脉状铜矿床。本文对盆地内从北至南三个典型脉状铜矿床(金满、水泄和白龙厂)进行了详细的铅、硫同位素研究，探讨了该类型矿床的成矿物质来源。分析表明。该类型矿床的铅同位素组成总体变化较小，且均位于上地壳铅演化线附近，说明成矿流体中铅具有稳定的上地壳来源。各矿床由于赋矿层位不同，矿石铅同位素组成表现出一定差异，如由兰坪盆地侏罗纪地层中的金满矿床到思茅盆地二叠纪地层中的白龙厂矿床，铅同位素比值(^207Pb/^204Pb)呈增高趋势，这表明这类矿床的铅主要来源于围岩地层，且地层越老，提供的铅就相对富含放射成因铅。矿床中脉石矿物重晶石、铁白云石等的锶同位素组成也表明，金满矿床成矿流体的^87Sr／^86Sr比值较高(0．70874—0．71232)，而白龙厂矿床的^87Sr／^86Sr比值较低(0．70829—0．70938)，接近于围岩灰岩的值(0．70755)。硫同位素研究表明，金满矿床中硫化物的δ^34S值变化最大，为-20．5‰- 7．0‰。水泄矿床中硫化物的δ^34S值变化最小，为-0．1‰- 4．2‰。而白龙厂矿床中硫化物的δ^34S值为-14．3‰--3．6‰。水泄和白龙厂矿床中重晶石的δ^34S值分别为 12．3‰- 19．0‰和 13．1‰，它们与盆地中蒸发岩层中石膏的δ^34S值( 10．8‰- 15．7‰)相近。分析表明，兰坪-思茅盆地中脉状铜矿的硫源主要来源于盆地热卤水萃取的地层中蒸发岩硫酸盐，它们通过有机质的热分解反应还原为沉淀硫化物所必需的低价硫。各矿床独特的硫同位素组成还表明它们的硫源受局部地层硫源和成矿流体物理化学性质所控制。本文提出大气降水起源的盆地热卤水通过对围岩中新生代地层的淋滤和萃取，获得了成矿所需的金属和硫，并在构造薄弱部位沉淀形成了本区的脉状铜矿床。     

新型组合连梁控制结构体系

分析了连梁在水平力作用下的破坏机制，对连梁结构体系的发展及结构抗震控制进行了评述，在此基础上提出一种新型组合连梁控制结构体系，并对其进行了概念分析，提出了有待研究的若干关键问题。     

Seismicity anomalies before the great earthquake of M_S=8.1 in the Kunlun Pass and its significance to earthquake prediction

Introduction The MS=8.1 earthquake occurred in west of the Kunlun Pass on November 14, 2001. It is the greatest earthquake occurred in China since the last half of the century and is an important event in recent seismic history of China. Some specialists consider that the earthquake occurred in the area where the earthquake monitoring capability is lowest in Chinese mainland; no striking precursory seismicity was found. The study on the precursory seismicity before the earthquake has not b…     

Exploration and Study on Deep Crust Structural Characteristics in the Jiashi-Artux Seismic Region

The data from two deep seismic sounding profiles was processed and studied comprehensively. The results show that crnst-mantle structures in the investigated region obviously display layered characteristics and velocity structures and tectonic features have larger distinction in different geological structure blocks. The boundary interface C between the upper and lower crust and Moho fluctuate greatly. The shallowest depths of C (30.0km) and Moho (45.5km) under Jiashi deepen sharply from Jiashi to the western Kunlun mountain areas, where the depths of C and Moho are 44.0km and 70.0km, respectively. The higher velocity structures in the Tarim massif determine its relatively “stable“ characteristics in crust tectonics. The phenomenon in the Jiashi region, where the distribution of earthquake foci mostly range from 20kin to 40kin in depth, may infer that the local uplift of C and Moho interface, anomalonsly lower velocity bodies and deep large faults control earthquake occurrence and seismogenic processes in the Jiashi strong earthquake swarm.     

多种遥感数据的综合编图研究

分析了多光谱、卫星测高和成像雷达3种数据的几何定位精度、水深反演有效范围和灵敏度等特性,利用TM、SPOT和SAR数据,研究其水深反演精度和同一性,由此确定了水深综合编图的原则。采用加权平均的数据融合技术,探讨了编制理想综合图件的方法。